|
| |
| |
| |
|
Statistics |
| Unique Visitors: 16 |
| Total Unique Visitors: 91053 |
| Visitors Out: 700 |
| Total Visitors Out: 700 |
|
|
|
| |
|
|
| |
|
| Canon Pixma iP1600 Reset |
| 2008-08-17 22:29:00 |
CANON PIXMA iP1600 RESET METHODE : The canon printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.) note: press 4 times for waste ink counter ...
|
| |
|
| Maintenance the Printer |
| 2008-08-17 22:29:00 |
Every printer needs an occasional tune-up, particularly if it has not been used for a long time. When lines or poor colors appears in prints, it's time to do a nozzle check. The maintenance process consumes ink, so don't use it unless necessary. Maintenance tools are accessed through the printer driver. Once the procedure begins, let it run full cycle before shutting the printer off. Nozzle check When printouts become faint or certain colors fail to print, test whether the print heads are working properly. Use the utility that performs a nozzle check pattern. If the printout shows gaps, clean the nozzles.Cleaning print headsIf the nozzle check indicates that a cleaning is need, or if the printer is completely clogg...
|
| |
|
| Canon MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970 Reset |
| 2008-05-10 16:16:00 |
Turn off the printerHold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.Hold the Power Button, release the Resume Button.Not releasing the Power Button, double click “Resume” and release Both Buttons.Click “Resume” for Four timesOnce you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.......
|
| |
|
| Canon S900, S820, S750, S520 Reset |
| 2008-05-10 16:06:00 |
Turn off the printer.Press and hold the RESUME button, then press and hold the POWER button.While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.1. Service/factory test printout, including ink sensor check2. EEPROM info printout3. EEPROM initialization4. Clear the waste-ink counter5. Printer model setting. (more selections beyond this- leave this alone)6. After selecting mode, press the POWER button to commit the change, and retu...
|
| |
|
| Canon S450 Printer Waste Ink Reset |
| 2008-05-10 16:01:00 |
Power off printerHold Resume button then press and hold POWER, the beeper will sound once.Hold POWER and release RESUMEPress RESUME twiceRelease Power buttonWhen the indicator lights steady, press RESUME three(3) times. The indicator should be orange.Press Power to set data......
|
| |
|
| Canon Pixma MPC190 Reset |
| 2008-05-10 15:56:00 |
Enter the service mode SERVICE MODE - pressing buttons Menu, Copy, Scan, Copy, Copy Choose TEST MODE. Select 8 PRINTER TEST TEST MODE. Choose 3, EEPROM CLEAR Select 0, INK COUNT Press the Set button. Click Stop / Reset button (return to item 3), and again press the ON / OFFFINISH......
|
| |
|
| Canon Pixma MP450 Reset |
| 2008-05-10 15:48:00 |
Turn off the printer. Hold button Resume/Cancel (red triangle in the circle), click on POWER - an indicator light green. Release the button Resume / Cancel keeping POWER. Click Resume/Cancel 2 times, keeping POWER, and then release all the buttons. When the indicator recorded GREEN - click Resume / Cancel 4 times! Turn off the printer POWER button.FINISH......
|
| |
|
| Canon Pixma MP150 Reset |
| 2008-05-10 15:43:00 |
Without the printer, press the button STOP / RESET and turn it on POWER button. Not when releasing POWER zagoritsya power indicator, press the button 2 times STOP / RESET Release the power button, and then a second button - you are in a service mode. Indicator recorded a green light. Click the STOP / RESET 4 times. Turn off the printerFINISH......
|
| |
|
| Canon Pixma MP130 Reset |
| 2008-05-10 13:11:00 |
Turn on the printer.Press the MENU key, and then SCAN, COPY and SCAN again - entered the service mode.Select NVRAM ACCESS further OK.Select SET ABS-M LEVEL and set value equal to zero.Select SET ABS-R LEVEL (if any) and is set to zero.Turn off the printer POWER button.......
|
| |
|
| Canon Pixma MP110 Reset |
| 2008-05-10 12:55:00 |
Turn on the printer. Click Menu, and then Scan, Copy and Scan again. All - entered the service mode. Select Counter Click Copy - everything. Waste dropped to zero. Turn off the printer POWER button.......
|
| |
|
| Canon Pixma iP6000, iP8500 Reset |
| 2008-05-10 12:39:00 |
1. Turn off the printer.2. Hold Resume button click POWER.3. Hold button RESUME release POWER.4. Then press the button RESUME again .5. Release all the buttons.6. Led Indicator in green and stay green.7. Click RESUME button 4 times , if you want to make another transaction.Look at the table below:Orange - Service test print 1 times - Orange - Service test print Green - EEPROM information print 2 times - Green - EEPROM information print Orange - EEPROM initialization 3 times - Orange - EEPROM initialization Green - Waste ink counter setting 4 time - Green - Waste ink counter setting Orange - Destination setting (Press Power > Press Resume 3x) 5 times - Orange - Destination setting (Press Power> Press Resume 3x) Green - Print head deep cleaning 6 times - Green - Print head deep cleaning Oran...
|
| |
|
| Canon Pixma iP4200, iP5200 Reset |
| 2008-05-10 12:24:00 |
1. Turn off the printer.2. Hold Resume button click POWER.3. Hold button RESUME, release POWER4. Then press the button again twice RESUME.5. Release all the buttons.6. Indicator led in green and stay green.7. Click the button 4 times RESUME, if you want to make another transaction. :Look at the table below :1 led- Orange - Service test print 1 times - Orange - Service test print2 led - Green - EEPROM information print 2 times - Green - EEPROM information print 3 led - Orange - EEPROM initialization 3 times - Orange - EEPROM initialization 4 led - Green - Waste ink counter setting 4 time - Green - Waste ink counter setting5 led - Orange - Destination setting (Press Power > Press Resume 3x) 5 times - Orange - Destination setting (Press Power> Press Resume 3x) 6 led - Green - Print head deep ...
|
| |
|
| Canon Pixma iP3000, iP4000, iP5000 Reset |
| 2008-05-10 12:11:00 |
Resetting Ink - Waste Overflow CounterWith the printer plugged in and powered off, press and hold the Resume/Cancel button, then press and hold the Power button. (DO NOT release the buttons. The LED light should be green to indicate that a function is selectable.).While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.).While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.).When the LED light is green, press the Resume/Cancel button 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in oran...
|
| |
|
| Canon Pixma iP1700, iP1300 Reset |
| 2008-05-10 12:05:00 |
Turn off printerHold down Resume button and press Power button.Keep holding down Power button and let Resume button go.Press Resume button 2 times then let BOTH buttons go.Green lights will flash and then stop blinking.When green lights are solid, press the Resume button 4 times.Press the Power button and the printer should turn off, if not, press the Power button once more.Your printer should respond as normal......
|
| |
|
|
|
| Canon MPC190 Waste Ink Counter Reset |
| 2008-05-10 11:41:00 |
Enter SERVICE MODE By pressing Menu, Copy, Scan, CopySelect TEST MODE. Select [8] PRINTER TEST in TEST MODE. Select 3. [EEPROM CLEAR]. Select 0. [INK COUNT]. Press the [Set] key. Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key. FINISH......
|
| |
|
| Canon i850, i950, S600 Waste Ink Reset |
| 2008-05-10 11:33:00 |
Start with the printer OFF1. Hold down RESUME and then hold down POWER2. Release RESUME3. Press RESUME twice, then release POWER4. Let green light blink until printer is done futzingSelect function with RESUME press POWER to execute:presses - light color - functionNumber of presses - light color - function0 presses - green - Test print (or exit service mode on i960)1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)2 presses - green - EEPROM initialize3 presses - orange - Reset waste ink counter......
|
| |
|
| Canon i320 i255 Waste Ink Counter Reset |
| 2008-05-10 11:05:00 |
Manual for Service Mode METODE 1 :Unplug power and USB. Open door and hold power button. Connect power. Close door, then release power button. METODE 2Turn off the printer. And disconnect the printer cable. Press and hold the POWER button, turn on the printer. The indicator (L.E.D.) should be green. Press and release the RESUME button , the indicator (L.E.D.) should be orange. Press and release the RESUME button again, the indicator (L.E.D.) should be green. Release both buttons.......
|
| |
|
| Canon S Series Reset Procedures |
| 2008-05-10 10:56:00 |
Waste Ink Counter Reset.1.Turn off the printer.2.Press and hold the RESUME button, then press and hold the POWER button.3.Release the RESUME button, Next press and release the RESUME button two(2) more times in succession. Note: you are still holding the POWER button). The printer’s carriage will “reset” or move momentarily. If the above was properly performed the printer will enter the “Service Mode”.4.Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press.-Service/Factory test printout, including ink sensor check.-EEPROM - Info printout.-EEPROM - Initialization.-Reset the Waste ink counter.-Printer model setting. (More selections beyond this point "Howeve...
|
| |
|
| Canon BJC-5000 Waste Ink Counter Reset |
| 2008-05-10 10:30:00 |
Power off printerPress and hold RESUME then press POWER, The indicator will start blinking.While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service modeWhen the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.Press Power to set dataFINISH......
|
| |
|
| Canon BJC-50 BJC-55 BJC-80 BJC-85 M40 M70 Waste Ink Counter Reset |
| 2008-05-10 10:20:00 |
Unplug Power CordHold POWER and RESUME buttonsPlug in Power CordRelease buttons after the printers starts upHold CARTRIDGE and RESUMEPress POWERRelease all buttons after the beepsPress CARTRIDGE 16 timesPress RESUMEUnplug the Power cordFINISH......
|
| |
|
|
| Canon BJC-2000 BJC-2100 Waste Ink Reset |
| 2008-05-10 09:54:00 |
Remove the CartridgeUnplug the AC Power CordClose Front access panelHold down the RESUME/RESET button and plug in the AC power cordRelease RESUME/RESET after plugging in the AC Power cord.Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .Press and HOLD RESUME/RESET for two seconds or more and release it.Press and HOLD RESUME/RESET for two seconds or more and release it.Unplug AC Power Cord to set data.FINISH......
|
| |
|
| Canon BJC 1000 Waste Ink Tank Reset |
| 2008-05-10 09:37:00 |
Remove CartridgeUnplug the AC Power CordHold down the RESUME buttonRelease RESUME after plugging in the AC Power cord.Press the RESUME once within 5 seconds and release the RESUMEPress and HOLD RESUME for two seconds or more and release itPress and HOLD RESUME for two seconds or more and release itUnplug AC Power Cord to set dataFINISH......
|
| |
|
| Canon BJ-30 BJC-35v BJC-70 Reset |
| 2008-05-10 09:12:00 |
Unplug adapterHold POWERPlug in ADAPTERRelease POWER after printer startsHold FF and MENU and press POWERRelease after beepsPress Cartridge until 1A is displayedPress ONLINEPress POWER to shutoff printerUnplug printer then re-plug printerFINISH ......
|
| |
|
| Resetter Canon BJ F900, F890, F700, F500, S900, S820, S750 and S520 |
| 2008-05-09 12:53:00 |
1.Turn off the printer. 2.Press and hold the RESUME button, then press and hold the POWER button. 3.Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily. You are now in Service mode. 4.Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.- Service/factory test printout, including ink sensor check- EEPROM info printout- EEPROM initialization- Clear the waste-ink counter- Printer model setting. (more selections beyond this- leave this alone) 5.After selecting mode, press the POWER button to commit the change, and return to ...
|
| |
|
| |
 |
