|
| |
| |
| |
|
Statistics |
| Unique Visitors: 48 |
| Total Unique Visitors: 135184 |
| Visitors Out: 773 |
| Total Visitors Out: 773 |
|
|
|
| |
|
|
| |
|
| JBL W12 GTI |
| 2008-04-23 12:50:53 |
12" Differential Drive® Design Subwoofer. Features of the JBL W12 GTI include: Cast aluminum heat-sink cooled magnet system - for an extreme power handling Differential Drive System - consisting of dual-edgewound voice-coil and dual-gap technology for a doubling of Power Handling, Sensitivity and an "electrical brake" to control cone motion at extreme excursions more than +/- 20mm linear cone excursion - provides extremely high sound pressure levels Symmetrical-Field-Geometry (SFG) - reduces distortions to minimum at any level Aquaplas coated cone - for exceptionally stable performance even at extreme levels Butyl rubber surround - for better sound quality and long durability Two separate gold plated screw/plug terminals - p...
|
| |
|
| JBL W10 GTI |
| 2008-04-23 12:50:04 |
10" Differential Drive® Design Subwoofer. Features of the JBL W10 GTI include: Cast aluminum heat-sink cooled magnet system - for an extreme power handling Differential Drive System - consisting of dual-edgewound voice-coil and dual-gap technology for a doubling of Power Handling, Sensitivity and an "electrical brake" to control cone motion at extreme excursions more than +/- 20mm linear cone excursion - provides extremely high sound pressure levels Symmetrical-Field-Geometry (SFG) - reduces distortions to minimum at any level Aquaplas coated cone - for exceptionally stable performance even at extreme levels Butyl rubber surround - for better sound quality and long durability Two separate gold plated screw/plug terminals - p...
|
| |
|
| JBL P1222 |
| 2008-04-23 12:48:56 |
12" Plus One® (patent pending) Dual-Voice Coil Subwoofer. Features of the JBL P1222 include: Power Handling, RMS - 400 Watts Power Handling, Peak - 1200 Watts Sensitivity - 97dB Mounting Depth - 5-7/8" Cut-Out Diameter - 11-1/16" Impedance - Dual 2 Ohms voice coils can be wired to deliver either a 1 ohm or 4 ohm load...
|
| |
|
| JBL P1022 |
| 2008-04-23 12:48:02 |
10" Plus One (patent pending) Dual-Voice-Coil Subwoofer. The JBL P1022 features a proprietary die-cast frame that ensures that the motor structure stays centered in the voice-coil gap, ensuring long-term reliability and durability. Features of the JBL P1022 include: Kevlar-impregnated paper woofer cones Plus One (patent pending) woofer cones Power Handling, RMS - 400 Watts Power Handling, Peak - 1200 Watts Sensitivity - 96dB Mounting Depth - 5-7/8" Cut-Out Diameter - 9-1/16" Impedance - Dual 2 Ohms voice coils can be wired to deliver either a 1 ohm or 4 ohm load...
|
| |
|
| JBL P 1520e |
| 2008-04-23 12:46:05 |
38cm (15") Subwoofer. Features of the JBL P 1520e include: Power Handling, Peak - 400/1600W Sensitivity - 92dB Nominal Impedance - 4 Ohms Frequency Response - 18Hz-400Hz Voice-Coil Diameter - 80mm Mounting Depth - 172mm Cut-Out Diameter - 353mm...
|
| |
|
| JBL P 1220e |
| 2008-04-23 12:45:12 |
30cm (12") Subwoofer. Features of the JBL P 1220e include: Power Handling, Peak - 400/1600W Sensitivity - 91dB Nominal Impedance - 4 Ohms Frequency Response - 20Hz-400Hz Voice-Coil Diameter - 80mm Mounting Depth - 172mm Cut-Out Diameter - 275mm...
|
| |
|
| JBL P 1020e |
| 2008-04-23 12:44:14 |
25cm (10") Subwoofer. Features of the JBL P 1020e include: Power Handling, Peak - 400/1600W Sensitivity - 89dB Nominal Impedance - 4 Ohms Frequency Response - 25Hz-500Hz Voice-Coil Diameter - 80mm Mounting Depth - 116mm Cut-Out Diameter - 229mm...
|
| |
|
| JBL GTO526 |
| 2008-04-23 12:43:17 |
Features of the JBL GTO526 include: Car Speaker Type - Component Elements - 2-Way Car Speaker Function - Subwoofer / Tweeter / Mid-Range Speaker Size - 5.25" Nominal Power Handling - 45 Watt RMS Peak Power Handling - 135 Watt Frequency Response - 70 Hz - 21 kHz Sensitivity - 89 dB Impedance - 4 ohm (Dual Coil) Tweeter Design - Dome Woofer Material - Poly / Plastic Surround Material - Rubber Top Mounting Depth - 2.38 In. Mounting Diameter / Length - 4.69 In....
|
| |
|
| JBL GTO1202D |
| 2008-04-23 12:42:19 |
Features of the JBL GTO1202D include: Car Speaker Type - Component Elements - 1-Way Car Speaker Function - Subwoofer Size - 12" Nominal Power Handling - 300 Watt RMS Peak Power Handling - 1200 Watt Frequency Response - 23 Hz - 400 Hz Sensitivity - 93 dB Impedance - 4 ohm (Dual Coil) Tweeter Design - Cone Surround Material - Rubber Top Mounting Depth - 5.06 In. Bottom Mounting Depth - 5.06 In. Mounting Diameter / Length - 11.19 In....
|
| |
|
| JBL GTO1200B |
| 2008-04-23 12:41:30 |
Features of the JBL GTO1200B include: 12" Bass Reflex Subwoofer Box Custom-tuned bass-reflex system acoustically optiized for in-vehicle applications. Precision tuned for extended, powerful, deep bass. Constructed with high-end MDF for rock-steady reliability Subwoofer Type GTO1204 - 300 mm Power Handling, RMS 250 Watts Power Handling, Peak 1000 Watts Sensitivity (2.83V @ 1m) 94dB Frequency Response (-3dB) 26Hz - 300Hz Dimensions (H x W x D) 18" x 17-5/16" x 14-3/16" ...
|
| |
|
| JBL GTO 804D |
| 2008-04-23 12:40:32 |
8" Single 4-Ohm Subwoofer. Features of the JBL GTO 804D include: RMS Power Handling - 200W Peak Power - 800W Frequency Response - 30Hz - 400Hz Sensitivity - 91dB Impedance - 4 Ohms Cut-Out Diameter - 180mm (7-1/16") Mounting Depth - 112mm (4-3/8") Overall Diameter - 210mm (8-1/4")...
|
| |
|
| JBL GTO 1502D |
| 2008-04-23 12:39:30 |
15" Dual 2-Ohm Subwoofer. Features of the JBL GTO 1502D include: RMS Power Handling - 300W Peak Power - 1200W Frequency Response - 23Hz - 400Hz Sensitivity - 93dB Impedance - 4 Ohms/1 Ohm Cut-Out Diameter - 342mm (13-7/16") Mounting Depth - 143mm (5-5/8") Overall Diameter - 383mm (15-1/16")...
|
| |
|
| JBL GTO 1204BR |
| 2008-04-23 12:38:38 |
300 mm Bass Reflex Subwoofer Box. For anyone that absolutely has to let rip in their car, the new range of GTO subwoofer enclosures are the real deal. All of the enclosures house the highly-praised GTO 12¿ subwoofer. The GTO1204BR enclosure is the recommendation for rock fans. The crispest possible port tuning takes drum solos to another level. But the GTO1204BR delivers great pop and electronic music, too. Moreover, the box has great visual styling. A varnished front and stable protective cast aluminium grilles mean that the enclosure will catch the eye in any car boot. Put these boxes in your car, inject 250 watts of power, and just listen to them take off! Features of the JBL GTO 1204BR include: Elegant Design - Black lacquered front and silver lacquered tunnel ...
|
| |
|
| JBL GTO 1202D |
| 2008-04-23 12:38:10 |
12" Dual 2-Ohm Subwoofer. Features of the JBL GTO 1202D include: RMS Power Handling - 300W Peak Power - 1200W Frequency Response - 23Hz - 400Hz Sensitivity - 93dB Impedance - 4 Ohms/1 Ohm Cut-Out Diameter - 285mm (11-3/16") Mounting Depth - 129mm (5-1/16") Overall Diameter - 316mm (12-7/16")...
|
| |
|
| JBL GTO 1002D |
| 2008-04-23 12:37:23 |
10" Dual 2-Ohm Subwoofer. Features of the JBL GTO 1002D include: RMS Power Handling - 250W Peak Power - 1000W Frequency Response - 25Hz - 400Hz Sensitivity - 91dB Impedance - 4 Ohms/1 Ohm Cut-Out Diameter - 234mm (9-3/16") Mounting Depth - 116mm (4-9/16") Overall Diameter - 264mm (10-3/8")...
|
| |
|
| JBL GTO 1000B |
| 2008-04-23 12:36:32 |
Features of the JBL GTO 1000B include: Power Handling, RMS 250 Watts Power Handling, Peak 1000 Watts Sensitivity (2.83V @ 1m) 93dB Frequency Response (-3dB) 32Hz - 300Hz Dimensions (H x W x D) 15-1/2" x 16-1/8" x 13-3/16" Impedance 4 Ohms 10" Bass Reflex Subwoofer Enclosure Custom-tuned bass-reflex system acoustically optiized for in-vehicle applications Precision tuned for extended, powerful, deep bass. Constructed with high-end MDF for rock-steady reliability....
|
| |
|
| JBL GT415 |
| 2008-04-23 12:35:40 |
38cm (15") Subwoofer. Features of the JBL GT415 include: Polypropylene woofer cone delivers exceptional attack resulting in incredibly tight bass response. Butyl rubber surrounds offer ideal cone-edge suspension and also guarantee long-term reliability by rejecting moisture and ultraviolet contamination. 12mm Linear one-way X-max and dual 40oz(80oz)magnets make this subwoofer a great choice for high output applications. Progressive spider provides better control at excursion limits than more commonly used linear spiders....
|
| |
|
| JBL GT412 |
| 2008-04-23 12:34:44 |
Features of the JBL GT412 include: 12" 1000W peak subwoofer Power Handling, RMS: 250 Watts Power Handling, Peak: 1000 Watts Frequency Response (13dB): 28Hz - 450Hz Sensitivity: 93dB Mounting Depth: 6-1/4" Cut-Out Diameter: 11-1/8"...
|
| |
|
| JBL GT410 |
| 2008-04-23 12:33:41 |
25cm (10") Subwoofer. Features of the JBL GT410 include: Polypropylene woofer cone delivers exceptional attack resulting in incredibly tight bass response. Butyl rubber surrounds offer ideal cone-edge suspension and also guarantee long-term reliability by rejecting moisture and ultraviolet contamination. 12mm Linear one-way X-max and dual 40oz(80oz)magnets make this subwoofer a great choice for high output applications. Progressive spider provides better control at excursion limits than more commonly used linear spiders....
|
| |
|
| JBL GT315 |
| 2008-04-23 12:32:48 |
Features of the JBL GT315 include: 15" subwoofer 300 Watts Continuous/600 Watts Peak Frequency Response 29Hz-3kHz...
|
| |
|
| JBL GT312 |
| 2008-04-23 12:31:29 |
Features of the JBL GT312 include: 12" subwoofer 225 Watts Continuous/450 Watts Peak Frequency Response 29Hz-3kHz...
|
| |
|
| JBL CS12 |
| 2008-04-23 12:30:37 |
300mm Subwoofer Features of the JBL CS12 include: Polypropylene woofer cone - for high power handling Rubber Surround - for high cone edge suspension and long durability Progressive Spider - offers better control at excursion limits than linear spiders Moderate Q design for high output in small sealed, vented and band pass enclosures...
|
| |
|
| JBL CS10 |
| 2008-04-23 12:29:33 |
Features of the JBL CS10 include: Power Handling, RMS - 100W Peak Power - 400W Frequency Response - 38Hz - 800Hz Sensitivity (2.83V/1m) - 91dB Impedance - 4 ohms Mounting Depth - 116mm Cut-Out Diameter - 229mm Revc - 3,6 ohms Vas - 63L Qts - 0,42 Fs - 29,6Hz Qes - 0,44 Qms - 6,87 Mms - 85g Levc - 2mH...
|
| |
|
| JBL BASSPRO II |
| 2008-04-23 12:28:14 |
Features of the JBL BASSPRO II include: 100-watt, four-channel amplifier driving a unique quad-voice coil 165mm subwoofer Single-vented band pass box design - makes the most efficient use of the amplifiers output watts and translates them into a deep and impulsive bass Closed rear chamber - for extremely high power handling Front- and rear-rounded vent - keeps away air-stream noise MDF panel - guarantees high stability and long durability even under extreme conditions 12 dB/octave electronic low pass filter with selectable 70Hz-100Hz crossover frequency for precise frequency division to match any system Line-level and speaker-level Inputs to integrate seamlessly with virtually any factory-installed head unit Variable input sensitivity for compatibility wit...
|
| |
|
| Infinity Reference REF9613I |
| 2008-04-22 15:48:41 |
Features of the Infinity Reference REF9613I include: Car Speaker Type - Component Elements - 3-Way Car Speaker Function - Subwoofer Size - 6" x 9" Nominal Power Handling - 100 Watt RMS Peak Power Handling - 300 Watt Frequency Response - 46 Hz - 21 kHz Sensitivity - 92 dB Impedance - 4 ohm (Dual Coil) Tweeter Design - Semi Dome Tweeter Size - 0.75" Woofer Material - Poly / Plastic Surround Material - Rubber Top Mounting Depth - 3 In. Bottom Mounting Depth - 3.56 In....
|
| |
|
| Infinity Reference REF1240W |
| 2008-04-22 15:43:45 |
Features of the Infinity Reference REF1240W include: Car Speaker Type - Component Car Speaker Function - Subwoofer Size - 12" Nominal Power Handling - 300 Watt RMS Peak Power Handling - 1200 Watt Frequency Response - 23 Hz - 400 Hz Sensitivity - 93 dB Impedance - 4 ohm (Dual Coil) Woofer Material - Poly / Plastic Surround Material - Rubber Top Mounting Depth - 5.06 In. Mounting Diameter / Length - 12.44 In....
|
| |
|
| Infinity KAPPA 100.3se |
| 2008-04-22 15:43:04 |
250mm Subwoofer. Features of the Infinity KAPPA 100.3se include: Subwoofer Dimensions: 250mm Power Handling, RMS: 275/1100 Watts Frequency Response (± 3dB): 20Hz - 250Hz Sensitivity (2,83 V @ 1m): 93dB Impedance: 4 Ohms Mounting Depth: 160mm Cut-Out Diameter: 232mm...
|
| |
|
| Infinity KAPPA 62.5i |
| 2008-04-22 15:42:45 |
Features of the Infinity KAPPA 62.5i include: Car Speaker Type - Coaxial Elements - 2-Way Car Speaker Function - Subwoofer � Tweeter Size - 6.50" Nominal Power Handling - 75 Watt RMS Peak Power Handling - 225 Watt Frequency Response - 45 Hz - 21 kHz Sensitivity - 90 dB Impedance - 4 ohm (Dual Coil) Tweeter Design - Dome Tweeter Size - 1" Woofer Material - Metal Surround Material - Rubber Top Mounting Depth - 2.19 In. Mounting Diameter / Length - 5.00 In....
|
| |
|
| Infinity REF 1240W |
| 2008-04-22 15:41:54 |
300mm Subwoofer. Features of the Infinity REF 1240W include: Power Handling, RMS: 300 watts Power Handling, Peak: 1200 watts Sensitivity (2.83V/1m): 93dB Frequency Response: 25Hz - 400Hz Nominal Impedance: 4 Ohms Voice-Coil Diameter: 51mm Mounting Depth: 129mm Cut-Out Diameter: 284mm...
|
| |
|
| Infinity REF 1040W |
| 2008-04-22 15:39:51 |
250mm Subwoofer. Features of the Infinity REF 1040W include: Power Handling, RMS: 250 watts Power Handling, Peak: 1000 watts Sensitivity (2.83V/1m): 91dB Frequency Response: 25Hz - 400Hz Nominal Impedance: 4 Ohms Voice-Coil Diameter: 51mm Mounting Depth: 116mm Cut-Out Diameter: 232mm...
|
| |
|
| Infinity KAPPA PERFECT 10VQ |
| 2008-04-22 15:38:12 |
i 250mm High-Output Subwoofer. Features of the Infinity KAPPA PERFECT 10VQ include: Power Handling, RMS: 400 watts Power Handling, Peak: 1600 watts Sensitivity (2.83V/1m): 87dB Frequency Response: 25Hz - 400Hz Nominal Impedance: 4 Ohms Voice-Coil Diameter: 77mm Mounting Depth: 166mm Cut-Out Diameter: 237mm...
|
| |
|
| Infinity KAPPA 120 3SE |
| 2008-04-22 15:32:17 |
Infinitys Ceramic Metal Matrix DiaphragmT material is a major breakthrough in transducer-diaphragm technology. For subwoofer applications, it offers pistonic operation over the entire usable range of the driver, eliminating colorations due to cone breakup modes and, thus, dramatically reducing distortion. And, the diaphragm will not deteriorate when exposed to moisture, sunlight or extreme temperatures, making ceramic metal matrix an ideal material for automotive applications. Infinitys top-ranked PreludeT MTS was the first product to use this breakthrough driver technology, which is now the hallmark of the brands home-audio lineup. * Flat Progressive Spider - A flat progressive spider is used on all Kappa subwoofers to provide maximum control at excursion limits.* Flared and Polished Pole...
|
| |
|
| How To Choose Car Subwoofer - Part 1 |
| 2008-03-31 10:53:26 |
How To Choose The Right Car Subwoofer The Bottom Line Read this review to find out how to choose the right subwoofer(s) for your car. Choosing a subwoofer can be a very difficult but interesting task. When you're choosing a car sub, you need to know what you really want. It depends what kind of music you listen to, and other factors. -Your Car Is Not A House-*I have heard subwoofers in big rooms in houses. The subs for example were 8", and the rooms were large. The bass was terrible because it wasn't able to fill the room or anything. The vibrations and everything that the sub had to do was not there. The car is a completely different environment. Bazooka makes popular subs, and a lot of people buy their 8" amplified tubes, I have heard these tubes in Jeep Wranglers and in a lot of SUVs, t...
|
| |
|
| How To Choose Car Subwoofer - Part 2 |
| 2008-03-31 10:53:05 |
The best of the new subwoofers are alluminum subs. I use a single aluminum Audiobahn 12" in my Pathfinder off of a Kicker amp, and I love it. The sound quality that it gives me is very clean and smooth. The surrounds around the voice coils are usually rubber. Other brands may use other types of surrounds, but rubber is still the most commonly used and most durable.-Voice Coils-*The more layers and space that you have, the better sound quality you get. There are two kinds of bass, clean bass and "ghetto bass". Clean bass subs include brands such as Nakamichi, McIntosh, Blaupunkt, Audiobahn, Infinity, and other higher end brands. They usually have dual-voice coils and give very clean bass. There are also such things as "ghetto subs" which can handle enormous amounts of power, such as 1000 Wa...
|
| |
|
| Pioneer TS-W12PRS |
| 2008-02-13 14:42:38 |
A subwoofer that can handle real power and equipped with the Voice Coil Cooling System (VCCS), which together with a giant magnetic circuit, draws heat away from the inside of the sub, so that the sound stays natural and your subwoofer keeps its cool. There's also a 3� (76 cm) dual layer long voice coil (2 x 4 ohm) that, combined with the extremely light Aramid Fibre Composite Cone, results in a very strong moving force. Features of the Pioneer TS-W12PRS include: Short description - C-Type Subwoofer Frequency response - 15 - 2.000 Hz Sensitivity (1W/1m) - 92 dB Qts - 0,39 Recommended sealed enclosure (Litres) - 28 Lowest resonance frequency (FS) - 24 Hz Maximum Power - 1.200 Watt Nominal input power - 300 Wat...
|
| |
|
| Pioneer TS-W121SPL |
| 2008-02-13 14:41:41 |
Loads of decibels combined with solid power make the TS-W121SPL a force to be reckoned with. This high-quality subwoofer weighs in at +165 dB with a thumping 2000 W maximum power output.Borrowing some of the innovative ideas from its older brother, the TS-W5000SPL, this 30 cm subwoofer features a Glass fibre/Carbon fibre reinforced IMPP cone and a die-cast aluminium basket. With all of this and more, the TS-W121SPL has what it takes for your next SPL competition, or perhaps your next trip around the block! Features of the Pioneer TS-W121SPL include: Short description - SPL C-Type Subwoofer Interlaced Glass Fibre/Carbon Fibre Reinforced IMPP cone Wide-roll, 3-layer fibre woven radial surround Double-stacked high power magne...
|
| |
|
| Pioneer TS-W101SPL |
| 2008-02-13 14:39:58 |
A big fan of SPL? Then the TS-W101SPL may be your winning ticket. The high SPL capability � up to 165 dB � will charge your system with intense power and maximum force. Power output checks in at a heady 1500 W. Based on the same technology found in the TS-W5000SPL competition model, this subwoofer is filled with quality material including a wide-roll, 3-layer fibre woven radial surround. Get ready to rock the block! Features of the Pioneer TS-W101SPL include: SPL C-Type Subwoofer Interlaced Glass Fibre/Carbon Fibre Reinforced IMPP cone Wide-roll, 3-layer fibre woven radial surround Double-stacked high power magnets Silver binding post terminal Aluminium die-cast basket with bottom hold structure Extended and v...
|
| |
|
| Pioneer TS-SW841D |
| 2008-02-13 14:38:29 |
Features of the Pioneer TS-SW841D include: Interlaced Ultra Long Glass Fibre reinforced IMPP™ drive cone 3-layer fibre woven radial surround Double cone reinforcement nodes Damper-less, Air suspension excursion control system Aluminium centre cap Bottom-hold design aluminium die-cast chassis with fin shape design Spring compression binding post terminal 4 ohm voice coil Frequency response - 30 - 1.500 Hz Sensitivity (1W/1m) - 85 dB Maximum Power - 500 Watt Nominal input power - 120 Watt Woofer size (cm) - 20 cm Woofer material - Interlaced Glass/Carbon Fibre reinforced IMPP™ upper cone...
|
| |
|
| Pioneer TS-SW124D |
| 2008-02-13 14:37:01 |
Slim and compact are not typical words associated with a subwoofer, but they perfectly describe the TS-SW124D. Only 8.3 cm deep, it revolutionises the very concepts of installation and application. For example, its recommended sealed enclosure is a mere 22.6 litre, the smallest of any Pioneer subwoofer currently available. It combines top technologies - the Interlaced Carbon/KEVLAR® brand Fibre Reinforced IMPP double cone - with the revolutionary space-saving concept, the Damper-less, Air suspension system. This innovative two-cone system creates an airtight space that reduces air pressure tension inside the subwoofer for clear, pure sound. A top-quality performer in a compact package, this subwoofer is sure to appeal to customers demanding design and in...
|
| |
|
| Pioneer TS-SW1241D |
| 2008-02-13 14:35:14 |
Features of the Pioneer TS-SW1241D include: Interlaced Ultra Long Glass Fibre reinforced IMPP™ drive cone 3-layer fibre woven radial surround Double cone reinforcement nodes Damper-less, Air suspension excursion control system Aluminium centre cap Bottom-hold design aluminium die-cast chassis with fin shape design Spring compression binding post terminal 4 ohm voice coil Frequency response - 18 - 1.000 Hz Sensitivity (1W/1m) - 88 dB Maximum Power - 1.400 Watt Nominal input power - 350 Watt Woofer size (cm) - 30 cm Woofer material - Interlaced Glass/Carbon Fibre reinforced IMPP™ upper cone...
|
| |
|
| |
 |
