|
| |
| |
| |
|
Statistics |
| Unique Visitors: 39 |
| Total Unique Visitors: 25724 |
| Visitors Out: 132 |
| Total Visitors Out: 132 |
|
|
|
| |
|
|
| |
|
| Nokia N95 Secret Codes |
| 2008-06-08 16:12:00 |
*#06#IMEI number (International Mobile Equipment Identity)*#0000#Firmware version and date, Phone Model and Operator Variant*#92702689#Life timer (W A R 0 A N T Y) - The amount of time your phone has spent sending and receiving calls.*#62209526#Wireless MAC Address (M A C _ W L A N)*#2820#Bluetooth MAC address (B T A 0?)*#7370#Format phone (R E S 0 ?)*#7780#Factory Reset (R S T 0 ?)Note:Format phone restores phone to as if it was out of the box. Retains firmware version and operator Variant changes but wipes all applications you have installed. Does not format the memory card so any apps on there may reinstall once powered back up again.Another way to format some symbian phones: Power off phone. Press and hold Green, * and 3 and keep them held whilst powering on and for a few seconds after...
|
| |
|
| Nokia N93 Secret Codes |
| 2008-06-08 16:08:00 |
#06#to check the IMEI.*#0000#To check the firmware version and date.*#92702689# *#war0anty#To check the IMEI. The date when it was purchased, and the date when it was repaired.*4720# (*hra0#)To activates the Half Rate.#4720# (#hra0#)To deactivates Half Rate.*#3370# (*efr0#)To activates Enhanced Full Rate.*#746085685# (*#sim0clock#)To check the SIM clock status.*#7220# (*#pca0#)To activate the GPRS and Packet Common Control Channel(PCCCH) supports.*#7230# (*#pcd0#)To deactivate the GPRS and Packet common control channel (PCCCH)supports.*#7760# (*#ssn0#)To check the manufacturing serial number.*#2820# (*#bta0#)To check the Bluetooth MAC address (Phone must have a built in bluetooth adapter).*#7370925538# (*#res0wallet#)Reset the mobile wallet....
|
| |
|
| Nokia E91 Secret Codes |
| 2008-06-08 16:00:00 |
*#06#Display the IMEI.*#0000#Display the firmware version and date.*#bta0#Display the Bluetooth MAC address.*#opr0logo#Clear the operator logo .*#pca0#Activate the GPRS PCCCH support.*#pcd0#Deactivate the GPRS PCCCH support .*#res0wallet#Reset the mobile wallet.*#sim0clock#Display the SIM clock status.*#ssn0#Display the manufacturing serial number.*#war0anty#Display the manufacturing and repair.*efr0#Enable EFR encoding.#efr0#Disable EFR encoding.*hra0#Enable HR encoding.#hra0#Disable HR encoding.#pw+1234567890+n#Display the SIM lock status:n = 1: provider lock.n = 2: network lock.n = 3: country lock.n = 4: SIM lock.SMART TRICK :- Press the media key to switch between now playing and current view.- Press and hold the media key to start the Visual Radio (FM Radio.- In Music Player, if you p...
|
| |
|
| Call Diverting |
| 2008-06-07 16:40:00 |
All To Activate: * * 21 * NUMBER # [SEND] To Cancel: # # 21 # [SEND] To Check: * # 21 # [SEND] No Answer To Activate: * * 61 * NUMBER # [SEND] To Cancel: # # 61 # [SEND] To Check: * # 61 # [SEND] Unreachable To Activate: * * 62 * NUMBER # [SEND] To Cancel: # # 62 # [SEND] To Check: * # 62 # [SEND] Busy To Activate: * * 67 * NUMBER # [SEND] To Cancel: # # 67 # [SEND] To Check: * # 67 # [SEND] To Cancel All Call Forwarding # # 002 # [SEND]...
|
| |
|
| Diverting Data Calls |
| 2008-06-07 16:39:00 |
All To Activate: * * 21 * NUMBER * 25 # [SEND] To Cancel: # # 21 # * 25 [SEND] To Check Status: * # 21 # * 25 # [SEND] No Answer To Activate: * * 61 * NUMBER * 25 # [SEND] To Cancel: # # 61 * 25 # [SEND] To Check Status: * # 61 # * 25 # [SEND] Unreachable To Activate: * * 62 * NUMBER * 25 # [SEND] To Cancel: # # 62 # * 25 # [SEND] To Check Status: * # 62 # * 25 # [SEND] Busy To Activate: * * 67 * NUMBER * 25 # [SEND] To Cancel: # # 67 # * 25 # [SEND] To Check Status: * # 67 # * 24 # [SEND]...
|
| |
|
| Diverting Fax Calls |
| 2008-06-07 16:38:00 |
All To Activate: * * 21 * NUMBER * 13 #[SEND] To Cancel: # # 21 # * 13 # [SEND] To Check Status: * # 21 # * 13 # [SEND] No Answer To Activate: * * 61 * NUMBER * 13 # [SEND] To Cancel: # # 61 * 13 # [SEND] To Check Status: * # 61 # * 13 # [SEND] Unreachable To Activate: * * 62 * NUMBER * 13 # [SEND] To Cancel: # # 62 # * 13 # [SEND] To Check Status: * # 62 # * 13 # [SEND] Busy To Activate: * * 67 * NUMBER * 13 # [SEND] To Cancel: # # 67 # * 13 # [SEND] To Check Status: * # 67 # * 13 #[SEND]...
|
| |
|
| Call Barring |
| 2008-06-07 16:36:00 |
Before you can activate these barring services you will need a barring code from your service provider. Call Barring can not be activated if Call Forwarding diverts are already in use. All Calls To Activate: * 330 * BARRING CODE # [SEND] To Cancel: # 330 * BARRING CODE # [SEND] To Check: * # 330 # [SEND] All Outgoing Calls To Activate: * 333 * BARRING CODE # [SEND] To Cancel: # 333 * BARRING CODE # [SEND] To Check: * # 333 # [SEND] All Incoming Calls To Activate: * 353 * BARRING CODE # [SEND] To Cancel: # 353 * BARRING CODE # [SEND] To Check: * # 353 # [SEND] All Outgoing Calls To Activate: * 33 * BARRING CODE# [SEND] To Cancel: # 33 * BARRING CODE # [SEND] To Check: * # 33 # [SEND] All Outgoing International Calls To Activate: * 331 * BARRING CODE# [SEND] To Cancel: # 331 * BARRING CODE #...
|
| |
|
| Calling Line Identity |
| 2008-06-07 16:34:00 |
Outgoing To Activate: * 31 # [SEND] To Deactivate: # 31 # [SEND] To Check: * # 31 # [SEND] Incoming To Activate: * 30 # [SEND] To Deactivate: # 30 # [SEND]...
|
| |
|
| Trium MTD30 |
| 2008-06-07 16:33:00 |
Monitor mode Hold C and press 379 Secret menu Hold C and press 987 Version number Hold C and press 597 Phase1 and 2 Hold C and press 499 Warm start Hold C and press 179 Instant turn off Hold C and press 999 Unlock menu Hold C and press 787090...
|
| |
|
| Handspring TREO |
| 2008-06-07 16:31:00 |
1. Open the flip and press the PHONEBOOK button one time to display the dial pad2. Enter ## and the OTKSL using the numbers on the Dial Pad3. Press the handset button shown in the diagram above4. At the Activations screen enter the MIN in the phone number field using the numbers on the device keyboard5. Put a check in the Enable Number Portability box and type the MSID in the MSIN field6. Press OK7. The device will display the network search pop-up and return to the Phonebook display...
|
| |
|
| Toshiba 2032P |
| 2008-06-07 16:29:00 |
1. Slide the Radio Standby Switch on the left side of the device to the upper side (ON) to activate the phone function. This is the switch with the phone icon over it 2. After power up is completed use the stylus to tap on the ADMIN pull up menu at the bottom of the screen and select ACTIVATION WIZARD. If your device has not yet been activated the ACTIVATION WIZARD will automatically start when you turn on the radio in your device.3. Tap NEXT 3 times. If the device has been previously activated it will require only 2 presses. 4. On the fourth screen enter the 6 digit OTKSL using keyboard 5. Enter the MIN in both entery fields then tap NEXT 6. Wait for the device to initialize and display “ready to connect” 7. To initiate IOTA tap the word ADMIN at the bottom of the display and then Dat...
|
| |
|
| Sony Ericsson T18 |
| 2008-06-07 16:25:00 |
*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:XXXXXX XX XXXXXX XTAC FAC SNR SPTAC = Type approval codeFAC = Final assembly codeSNR = Serial numberSP = SpareTo access SIM-Locking menu of your phone, press: < * [CLR] ...
|
| |
|
| Samsung T100 |
| 2008-06-07 16:23:00 |
*#06# -> Show IMEI *#9999# -> Show Software Version*#0001# -> Show Serial Parameters*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!!!! but also change IMEI to 447967-89-400044-0, you must use CHGIMEI to restore it) *2767*2878# -> Custom EEEPROM Reset*#8999*228# -> Battery status (capacity, voltage, temperature) *#8999*246# -> Program status *#8999*289# -> Change Alarm Buzzer Frequency *#8999*324# -> Debug screens *#8999*364# -> Watchdog *#8999*377# -> EEPROM Error Stack *#8999*427# -> Trace Watchdog *#8999*523# -> Change LCD contrast *#8999*544# -> Jig detect *#8999*636# -> Memory status *#8999*746# -> SIM File Size *#8999*778# -> SIM Service Table *#8999*785# -> RTK (Run Time Kernel) errors *#8999*786# -> Run, Last UP, Last DOWN *#8999*837# -> Software Version *#8999*842# ->...
|
| |
|
| Samsung V200 |
| 2008-06-07 16:22:00 |
v200 Unlock Code-> *2767*7822573738#*#9324# Netmon (press the hangup key to exit) *#9998*JAVA# Edit GPRS/ CSD settings (S100 Only) *#9998*Help# Help screen/ List of codes *#9998*LOGO# Change operator Logo *#9998*RTC# RTC Display *#9998*Bat# Battery Status *#9998*Buz# Turns Buzzer ON *#9998*Vib# Turns Vibrator ON *#9998*LCD# LCD Contrast *#9998*9999# Softwre Version *#9998*8888# Hardware Version *#9998*377# NVM Error Log (?????) *#9998*NET# SIM Network ID *#9998*778# SIM Serv. Table *#9998*SIM# SIM Info *#9998*PN# Production No. *#9998*968# Reminder Tune *#9998*NVM# Displays Non-Volitile Memory Status *#9999*C# ??????????????????? *#06# Displays phones I**I No. ***/// ***/// NOTE /// *** RED COLOR , they appear serious !!! Use at own risk !!!*#9998*2576# Forces SIM Error *#9998*DEAD# Forces...
|
| |
|
| Samsung A500 |
| 2008-06-07 16:22:00 |
1. Enter ## and the 6 digit OTKSL 2. SERVICE MENU will appear and 1.Basic will be highlighted 3. Press OK 4. Device will display NAM CDMA/ Phone Number 5. Enter 10 digit MIN 6. Press OK (3 times) 7. Display will return to Service Menu. Press END. 8. Programming is complete...
|
| |
|
| Samsung N240 and N400 |
| 2008-06-07 16:19:00 |
Samsung N240 and N400 1. Enter ## and type in the 6 digit OTKSL 2. The display will show SVC MENU and 1. Phone Number 3. Press OK 4. Enter the 10 digit MIN and press OK 5. The display will show NAM with Home SID on the second line (Note: SID is no longer used) 6. Press OK 7. The display will return to the SVC MENU 8. Press END to complete the programming...
|
| |
|
| Sagem MC959 Secret Codes |
| 2008-06-07 16:18:00 |
In main menu press * for hot-menu:lcd, led, vibra, tests, imei, software versions, battery voltageType MENU - 5 - 1 - 1 - # to enter Engineering menu on SAGEM (RC-712, 721, 815 and 815 plus) phones...
|
| |
|
| Sagem RC815 Pro |
| 2008-06-07 16:17:00 |
*# Commands*#06# IMEI number*#30# followed by send - Corresp. ID incoming displayed*#31# followed by send - Your ID. outgoing displayed*#33# followed by send - Call barr inactive*#35# followed by send - Call barr inactive*#43# followed by send - Call Waiting*#100# followed by send - Your mobile number*#101# followed by send - DHLRU1 ?meaning?*#102# followed by send - Transmitter information*#103# followed by send - Current date and time*#147# followed by send - Last caller's number*#1345# followed by send - Call credit and service time leftHidden menuEngage one of the menus with the scroller then press *Appli menu: option 1 Version, option 1 BatteryProm menu: option 1 IMEI numberSim lock: option 1 Sim lock - press okay for 30 second countdown, C button to cancel (caution with this I don't ...
|
| |
|
| Sagem RC712 |
| 2008-06-07 16:16:00 |
Enter Engineering menu MENU - 5 - 1 - 1 - # 1) IMEI 2) Flash Eprom etc. 3) ? 4) SP unblock 5) ? 6) Contrast Settings. When in menu type * and a new menu with new options will appear....
|
| |
|
| Qualcomm |
| 2008-06-07 16:15:00 |
QCP-800 programming: menu + 3 + 0.SPC: "000000" or may be other SPC typed by user.QCP-820/1920/2035: type "111111" and press Jog Dial.Choose "Programming" and enter SPC: "000000" or may be other SPC typed by user.QCP 1960 and 2760 1. Press softkey under the work MENU 2. Press 8 0 3. Enter the OTKSL 4. Press softkey for OK 5. Enter MIN and press softkey for OK 6. No SID is require for this handset 7. Press softkey for EXIT 8. Programming is complete...
|
| |
|
| Philips C12 |
| 2008-06-07 16:06:00 |
To send free SMS messages on a Philips C12. Type the message and choose to send. As the requesting text comes up hold down the power button and the message will be sent for free!Secret Codes*#06# for checking the IMEI (International Mobile Equipment Identity)If you Put *#06# in the phone and leave it on for 24 hours you will get 50 pounds worth of credit. Works in UK.To send free SMS messages on a Philips C12. Type the message and choose to send. As the requesting text comes up hold down the power button and the message will be sent for free!Or you can send free SMS if you have no more talktime.Phonebook Positionxx# - xx position in Phone Book (e.g. 09#, the number is saved on place 09)...
|
| |
|
| Philips Diga |
| 2008-06-07 16:05:00 |
Blocking list *#3333*#Time connected *#2558*#Flags,something *#3377*#Security code *#7489*#Service Provider LockThe Service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator....
|
| |
|
| |
 |
